Non-Adjusting CPAP Machines

Build upon innovative new features to impress. The AirSense 10 is a polished-looking machine with a 23% lighter built-in humidifier, keeping the user experience in mind for a higher level of customization. Easily understood menus, SmartStart™, and quiet operations are a few of the features that make this CPAP a great option. These reasons make Airsense 10 the #1 selling CPAP on the market. This is a single-pressure CPAP machine that does not auto-adjust. Features HumidAir™ Heated Humidifier A heating plate built-in so the water chamber can be attached directly to the machine for a minimal footprint. The humidifier can be set to 9 different settings: off, and 1 through 8 with 1 being the lowest level of humidification, and 8 being the highest. Take humidification to the next level by adding the OPTIONAL ClimateLineAir integrated heated tube to maintain the temperature of the entire air circuit to provide the most humidity while minimizing the chance of water accumulation. The Auto Climate Control mode will consider the room temperature and adjust the level of humidification delivered to the mask. AutoRamp™ This technology makes algorithms allow the machine to sense when the user is awake or asleep, and once asleep will comfortably rise to the full prescribed pressure. SmartStart™ For added convenience, the AirSense™ 10 CPAP features SmartStart™ technology. Simply put on the mask and start breathing and the machine will begin therapy. Similarly, when the mask is taken off, the machine will register the user is no longer using the machine and turn it off. Color LCD Display with Integrated Light Sensor The LCD display of the AirSense™ 10 CPAP features vibrant colors to help clearly identify different stages of therapy. A blank circle fills with green as therapy pressure ramps up. Green and red faces indicate proper or poor mask fit and are also used to indicate if the humidifier is working properly. The machine also features an integrated light sensor which allows the screen to adjust brightness automatically when ambient light changes. If a restroom break is needed in the middle of the night, the screen won't blind with brightness, and in the morning it won't be too dim to read how therapy went. In addition, the screen will automatically turn off after a short time to avoid extra light in a dark room. Expiratory Pressure Relief (EPR™) Now a mainstay on ResMed machines, EPR™ is intended to make therapy more comfortable. Breathing out against full prescribed pressure can sometimes be uncomfortable. EPR™ steps in and helps to lower the pressure by a set amount on exhalation. Therapy Data The AirSense™ 10 CPAP provides basic therapy data on the LCD Display such as Usage Hours, Events per Hour, Mask Seal, Period, Days Used, Days 4hrs+, Average Usage, Used Hours. The data provided is ONLY for clarification purposes and is not a substitute for medical advice. Specifications Manufacturer:  ResMed Weight - Machine with Water Chamber: 2.75 lbs (44 oz.) Dimensions - Machine with Water Chamber: 10.04 in L x 4.57 in W x 5.91 in H Weight - Standard Chamber: 0.54 lb Weight - Machine with Side Cover (Without Water Chamber): Approx. 2.452 lbs Dimensions - Machine with Side Cover (Without Water Chamber): Approx. 8 in L x 4.57 in W x 5.91 in H Dimensions - Travel Bag: 13.24 in L x 10 in W x 5 in H Weight - Travel Bag Alone: 1.18 lb Weight - Machine with Humidifier; Power Supply and Cord; SlimLine Tube; Travel Bag: Approximately 5.1 lbs Weight - Machine with Humidifier; Power Supply and Cord; OPTIONALClimateLineAir Tube; Travel Bag: Approximately 5.25 lbs Sound Level: 26.6 dBA Water Chamber Capacity: 380 mL Weight - 90W Power Supply, Cord, and Plug: 1.29 lb Dimensions - 90W Power Supply Only (Not including Cord or Plug): 5 1/2 in x 1 7/8 in x 1 1/4 in AC Input Range - 90W Power Supply: 1 00 - 240V, 50 - 60Hz, 1.0 - 1.5A, Class II AC Input Range - 90W Power Supply: 100 - 240V, 50 - 60Hz, 1.0 - 1.5A, Class II DC Output - 90 W Power Supply: 24V --- 3.75A Typical Power Consumption: 53W (57VA) Peak Power Consumption: 104W (108VA) Operating Pressure: 4 - 20 cm H2O (0.2 cm increments) Length - SlimLine Tubing: 6 feet Materials - SlimLine Tubing: Flexible Plastic Materials - Standard Water Chamber: Injection Molded Plastic, Aluminum, Silicone Seal Materials - Dishwasher Safe Water Chamber: Injection Molded Plastic, Stainless Steel, Silicone Seal Materials - Standard Filter: Polyester non-woven fiber Temperature Range - Optional ClimateLineAir™ Heated Tube: 60 - 80° F (16 - 30° C) Operating Temperature: 41° F - 95° F (5° C - 35° C) Storage and Transport Temperature: -4° F - 140° F (-20° C - 60° C) Operating Humidity: 10% - 95% Relative Humidity, non-condensing Storage and Transport Humidity: 5% - 95% relative humidity, non-condensing Operating Altitude: Sea Level - 8500 Feet (2,591 M); Air pressure range 1013 hPa - 738 hPa Maximum Temperature - Heating Plate: 154° F (68° C) Maximum Temperature - Cut Out: 165° F (74° C) Maximum Gas Temperature: Less than or Equal to 106° F (? 41° C) IEC 60601-1:2005 Classification: Class II (Double Insulation), Type BF, Ingress protection IP22 Machine Warranty: 2 Years Patient Weight: Greater than 66 lbs   Important tips  important tips Best Selling CPAP machine. MyAir app allows you to have your sleep report at your fingertips. Integrated Humidifier. Lightweight for portability. Very Quiet design, minimal noise level experience Videos How to Setup and Use Your New AirSense10 CPAP Machine

The premium single pressure machine integrates the HumidAir™ humidification system, making it 23% lighter than former models in a system with fewer parts. This is a single pressure CPAP machine that delivers a set pressure during use. This machine does not automatically adjust to change the pressure. You can add the optional heated ClimateLineAir™ Tube to enhance humidification and reduce rainout. Specifications Manufacturer: ResMed  Included In Box: AirSense 10 Elite, Built-in HumidAir Humidifier, Standard Humidifier Chamber, SlimLine Breathing Tube, Universal Power Supply with Cord, Travel Bag, Starter Filter, Filter Cover, Printed Users Manual. HCPCS Code: E0601 GTIN / UPC Code: 00619498372058 Warranty: 2 Years - Review manufacturer's documentation for full warranty details. Prescription Required: Yes FAA Approved: Yes Physical Specifications Size  (Approx) CPAP with Chamber: 4.57 x 10.04 x 5.91 Inches External Power Supply: 5.50 x 1.88 x 1.25 Inches Weight ( Approx) CPAP with Chamber: 2.75 Lbs Weight ( Approx) External Power Supply: 1.30 Lbs Materials: Not Made with Natural Rubber Latex Performance Specifications Therapy Modes: CPAP Pressure Range: 4-20 CM H2O Ramp: AutoRamp with Sleep DetectionStandard Ramp User Adjustable 0 to 45 Minutes Ramp Start: 4 to CPAP Pressure Sound Levels: 26.6 dBA Altitude Adjustment: Automatic Up To 8500 Feet Leak Compensation: Automatic Auto On/Off: Yes, SmartStart & Stop Comfort Technology: EPR (Settings = Off, 1 Minimum, 2 Moderate, 3 Maximum) Rainout Reduction: ClimateControl with optional ClimateLineAir Heated Tubing Filters Disposable (Standard & Hypoallergenic Available) Alarms: On-Screen Messages Including High Leak Detected, Water Tub Not Inserted Properly, Air Tubing May Not Be Connected Properly, Mask May Be Fitted Incorrectly, Tubing Blocked, System Fault, Air Filter May Be Blocked, etc.  Compatibility Masks: Compatible with all CPAP & BiLevel Masks Tubing: Compatible with all Standard, Performance, Slim Performance, SlimLine, and ClimateLineAir Heated Tubing. Humidifiers: Built-in HumidAir Heated Humidifier Oxygen: Up to 4LPM (Requires Adapter or Mask with Oxygen Port) Therapy Data & Compliance Data Storage: Onboard, SD Data Card (Optional) Data Included: 365 Days of Summary Data; Variable Amount of Detailed Data Including Usage Hours, Events (AHI) Per Hour, Mask Seal, Humidifier Functionality, Days Used, Days Used More Than 4 Hours, Average Usage, Used Hours, Average Pressure, Leak Rate, AHI, Total Apnea Index, and Central Apnea Index. Data Viewing: Data Viewing On Screen Sleep Report,  MyAir Online, Desktop Software Not Available to Consumers Humidifier Specifications Humidifier: Built-in HumidAir Heated Humidifier Chamber Capacity: 380 mL to Maximum Fill Line Humidifier Chambers: Standard and Optional Long Life Dishwasher Safe Humidifier Notes: Humidifier plate can be turned OFF, and used as a "cool passover" humidifier, to conserve energy. Humidifier chamber CAN be left empty if heater plate is turned OFF. Humidifier Power: NA (Built in to CPAP Device) Humidifier Settings: Off, 1 Minimum to 8 Maximum Power Specifications AC (Wall)  Power Universal:   AC power 100-240V, 50-60Hz (Auto Sensing) AC Power Supply: Yes AC  Power  Supply  Size: 5.50 x 2.00 x 1.25 Inches (Approx) AC  Power  Supply  Weight: 1.30 Lbs (Approx) AC  Power Cord  Length: 12 Feet (Approx) Power  Consumption: 53 Watts Typical; 104 Watts Peak DC (Mobile)  Power: Optional Accessory DC  Power Supply Size: 6.5 x 2.5 x 1.5 Inches (Approx) DC  Power  Supply Weight: 1.69 Pounds (Approx) DC  Power  Cord Length: 9 Feet 5 Inches (Approx) DC Power Cord Fuses: 20 Amp DC  Power Input: 12 Volts or 24 Volts DC  Power Consumption: 51 Watts Typical; 106 Watts Peak Battery Power: Optional External Accessory