AirSense 11 CPAP Bundle with AirTouch F30i Full Face Mask & Filters

• Set up the system on a stable surface: Keep the AirSense 11 on a flat, ventilated area, avoid soft surfaces that can block air intake.
• Use distilled water only: Fill the humidifier chamber with distilled water each night to prevent mineral buildup and keep humidity consistent.
• Empty the water chamber daily: After each use, pour out any remaining water and let it air-dry to avoid bacterial growth.
• Replace filters regularly: Change the disposable filter every 30 days or sooner if you notice discoloration or reduced airflow.
• Use the myAir app for tracking: Pair your AirSense 11 via Bluetooth to view sleep data, leak rates, and pressure trends to improve therapy consistency.
• Activate AutoRamp before bed: This feature gradually increases pressure as you fall asleep, making it easier to start therapy comfortably.
• Enable Expiratory Pressure Relief (EPR): Reducing pressure during exhalation can make breathing feel more natural and relaxed.
• Check the humidifier seal: Make sure the chamber lid closes fully an unsealed humidifier can cause air leaks and pressure loss.
• Keep tubing off the bed: Route the hose over your headboard or use a hose holder to prevent tangling or pulling during the night.
• Clean the AirTouch cushion daily: Wipe gently with alcohol-free CPAP wipes to maintain hygiene and prevent foam deterioration.
• Avoid washing the memory foam: Never submerge the cushion in water; moisture can damage the foam layer and weaken the seal.
• Replace the cushion monthly: For consistent comfort and hygiene, replace the UltraSoft cushion about every 30 days or sooner if it loses shape.
• Inspect the frame regularly: Check the magnetic clips and elbow connection for wear or looseness—replace the frame every three months for best stability.
• Adjust headgear evenly: Tighten straps gradually on both sides to balance pressure and avoid overtightening, which can cause leaks or discomfort.
• Use the QuietAir diffuser: Ensure the diffuser is properly aligned to minimize exhalation noise and maintain a calm sleep environment.
• Keep magnets away from medical devices: Maintain a minimum distance of six inches between the mask’s magnetic clips and any implanted devices.
• Run a test fit before sleeping: Turn the machine on and check for leaks while lying in your normal sleeping position. Adjust the straps if you hear air escaping.
• Use ClimateLineAir heated tubing (optional): If you experience dryness, upgrade to the compatible heated tube to control temperature and humidity.
• Clean the hose weekly: Wash with mild soap and warm water, rinse thoroughly, and hang to air-dry fully before reconnecting.

Store safely during travel: Pack the AirSense 11 in a protective case and keep the AirTouch mask in a breathable pouch to prevent dust or moisture exposure.