Under $99

Product Overview This was designed specifically for the AirFit F20 and the AirTouch F20 and the AirFit F30. It is not designed to be used on any other masks. This strap is designed to add stability to the mask and prevent leaks. The strap attaches to the mask over the hose connection and then wraps around your head and connects with velcro on the side. There are 2 pieces of velcro at one end, you can cut between these to shorten the strap if necessary. There is a black strip covering over a central piece of velcro that you can remove if you want to attach it to your headgear.  You can do a quick test to see if this will strap will help with your particular leak: First, loosen the straps until the mask leaks With the palm of your hand against the hose connection of the mask, press the mask toward your face. If that stops the leaks, then it will help. It is a bit much to add another strap around your head, but it does work well if that is your main issue. The installation instructions are included in the package. Do not use on a mask where it may cover the vent holes near the hose connection.  Compatibility The Anti-Leak Strap AirFit F20 is for the following masks only:  ResMed AirFit F20 ResMed AirTouch F20 ResMed AirFit F30 Care Instructions For best results, hand wash in warm soapy water and rinse well. Wash weekly or more often if desired. You can use any type of soap you would use on your skin to wash this product. If you machine wash and dry, use delicate settings and a cooler dryer.  Any pink micro fiber products should be washed before first use to remove excess dye in the fabric or it may turn your mask pink (that does not hurt the mask)

Product Overview: Pad-A-Cheek Strap Pads are intended to make your headgear more comfortable and to deter strap marks on your face. The incredibly soft micro fleece will wrap around your strap and protect your face while you sleep. The addition of strap pads to the headgear can help to stabilize the mask and keep it from shifting out of place. 

Product Overview This strap is designed to add stability to the mask and prevent leaks. The strap attaches to the mask over the hose connection and then wraps around your head and connects with velcro on the side. There are 2 pieces of velcro at one end, you can cut between these to shorten the strap if necessary. There is a black strip covering over a central piece of velcro that you can remove if you want to attach it to your headgear. It was designed for the Mirage Quattro but will work on several full face masks. This is available in 2 sizes. The regular length is 31 inches and the Long is 33 inches. You can shorten either one of these by cutting between the velcro, if necessary.  Compatibility The Anti-Leak Strap is for the following masks and may work on others as well:  ResMed Mirage Quattro ResMed Quattro FX Philips Respironics Comfort Gel Full  Philips Respironics Amara Fisher Paykel Simplus Fisher Paykel Vitera  Do not use on the following masks: ResMed Quattro Air ResMed AirFit F10 ResMed AirFit F20 (there is an Anti-Leak Strap just for this mask) ResMed Mirage FX Care Instructions Machine washing and drying is not recommended as this will make your strap shrink, but there are other ways to care for it. To get a nice scent on your new microfiber sleep mask without risking the shrinking issue (and also to help remove any excess dye), we recommend hand-washing in warm soapy water followed by a good rinse with cool or cold water afterward.

Product Overview Protect your ears and reduce discomfort with this pair of velcro Earloop Covers. They are thin enough that they won't irritate, yet thick enough to keep the back of your ear warm! Compatibility The ear loop covers fit: Resmed Swift FX bella Oxygen cannulas Care Instructions To keep these pads clean and in good shape, wash them with a gentle soap weekly or more often if desired. Avoid harsh detergents to avoid ruining the texture of your pads.  Replacement of the pads should be every 6 months.

Product Overview The forehead pad is made of soft foam and fits securely over the silicone mask. The slits in the edge are big enough to thread through headgear if needed, so you can adjust it as necessary for a perfect fit. There's an extra pad tucked into PAD A CHEEK that you can use for thicker cushioning or switch out with one on your other cheek if desired. Compatibility The Forehead Pad Style B fits: ResMed Mirage Quattro ResMed Quattro Air (for more coverage than the Style C) ResMed Mirage FX (for more coverage than the Style C) ResMed Soft Gel ResMed Mirage Activa/Activa LT ResMed Mirage Micro ResMed Ultra Mirage II ResMed Ultra Mirage Full  Philips Respironics TrueBlue Philips Respironics EasyLife Philps Respironics ComfortGel Blue Philips Respironics Amara/Amara Gel Philips Respironics ComfortGel Blue Full Philips Respironics ComfortGel Nasal  Fisher & Paykel Forma Fisher & Paykel FlexiFit 405/406/407 Fisher & Paykel Zest/Zest Q/Zest Petite Care Instructions You can use any type of soap you would normally wash your skin with to give this product a good cleaning. Even though it's machine-washable, we recommend washing by hand for best results. With proper care and maintenance, the DRYBAG will last 6 months or longer. Installation Click here for installation instructions

Product Overview: The Strap Pad Y is a very soft pad designed specifically for use with the AirFit N20 and Wisp headgear.This will cover the side straps as well as the buckle where the back headgear attaches, but it will still allow access to the buckle for mask removal. The Wisp Strap Pads have been replaced by the Strap Pad Y. These are extremely simple to set up. 

Product Overview CPAP therapy is not a glamorous part of your day. The strap pads are designed to make the headgear more comfortable and prevent strap marks on the face that can result from CPAP use in healing sleep apnea patients as well as those who suffer from snoring or mild obstructive sleep apnea symptoms. These colorful, easy-to-apply straps add some personality back into this daily routine! Compatibility The Strap Pad- Original Fleece fit: ResMed AirFit F10 ResMed AirFit F20 ResMed AirTouch F20 ResMed AirFit F30 ResMed Quattro Air ResMed Quattro FX ResMed Mirage Quattro ResMed Mirage Liberty ResMed Ultra Mirage Full Face  ResMed AirFit N10 ResMed Mirage FX ResMed Soft Gel ResMed Activa/Activa LT ResMed Mirage Micro ResMed Ultra Mirage II Nasal Philips Resprironics Amara/Amara Gel Full Face Philips Respironics Amara View Philips Respironics ComfortGel Blue Full Face  Philips Respironics Comfort Fusion Philips Respironics Comfort Gel Blue Nasal Philips Respironics DreamWear Full Face  Philips Respironics DreamWisp Philips Respironice EasyLife Philips Respironics Pico  Philips Respironics TrueBlue Philips Repsironics OptiLife  Fisher & Paykel FlexiFit 431/432 Fisher & Paykel Forma Fisher & Paykel Simplus Fisher & Paykel Eson/Eson 2 Fisher & Paykel FlexiFit 405/406/407 Fisher & Paykel Zest/Zest Q/Zest Petite Care Instructions For best results, hand wash in warm soapy water and rinse well. Wash weekly or more often if desired! You can use any type soap you would with on your skin to wash this product as long it's gentle enough for sensitive areas of the body (you know what I'm talking about). If you machine wash and dry, be sure to set delicate settings AND cool down that hot blow-dryer before handling these delicates.

Product Overview The Barrel Cozy offers a soft and comfy upper lip cushion that won't interfere with your nasal pillows. It's padded underside helps insulate to prevent condensation in the barrel, while it wicks away sweat and oils from your skin for better grip! Compatibility This Barrel Cozy for DreamWear Gel Nasal Pillows fits:  Philips Respironics DreamWear Gel Nasal Pillows mask ResMed AirFit P30i Care Instructions For best results, hand wash in warm soapy water and rinse well. Wash weekly or more often if desired. You can use any type soap you would use on your skin to wash this product. If you machine wash and dry, use delicate settings and a cooler dryer. Any pink microfiber products should be washed before first use to remove the excess dye in the fabric or it may turn your mask pink (that does not hurt the mask) With proper care, this product will last 6 months or longer.

Product Overview Protect your ears and reduce discomfort with this pair of velcro Earloop Covers. They are thin enough that they won't irritate, yet thick enough to keep the back of your ear warm! Compatibility The ear loop covers fit: Resmed Swift FX bella Oxygen cannulas Care Instructions To keep these pads clean and in good shape, wash them with a gentle soap weekly or more often if desired. Avoid harsh detergents to avoid ruining the texture of your pads.  Replacement of the pads should be every 6 months.

Product Overview The strap pads provide a soft, fleece-like material to cushion the top of your ear from injury. It also prevents straps from slipping off so that you'll be more comfortable while sleeping. These straps are excellent for masks with curved, or irregularly shaped neckpieces as they stretch around bends without bunching up like many other fabric alternatives would under the same circumstances. The one downside of these helpful accessories is that when it comes to color selection, you're only given blue choices at this time- hopefully, more colors will be added soon! Care Instructions For best results, hand wash in warm soapy water and rinse well. Wash weekly or more often if desired. You can use any type of soap you would use on your skin to wash this product. If you machine wash and dry, use delicate settings and a cooler dryer.  Installation Installation of Upper Ear Pad

The Pad A Cheek AirFit P10 Barrel Cozy makes your AirFit P10 mask feel much more comfortable. Designed with soft microfiber, it’s a great alternative to the silicone or hard plastic of most masks. It cushions the area around your upper lip, absorbing sweat and oil,  helping to reduce skin irritation.