Freedom V2 DC cable for Transcend Micro CPAP, white cord with right angle barrel plug and USB C end

Freedom V2 Replacement Transcend Micro Machine DC Cable

cpaphero | SKU:

CH14VC

Freedom V2 Replacement Transcend Micro Machine DC Cable

Out Of stock

$19.99

Out Of stock

Out of stock

60-Night Risk Free

Free Shipping Over $50

Unlimited Support

Price Match Guarantee

The Transcend Micro 14V Cable for Freedom V2 Battery is a DC power cable designed to let an existing Freedom V2 battery (or compatible battery) power a Transcend Micro travel CPAP machine. It connects the USB-C output of the battery (DC out) to the CPAP machine’s power inlet.

Using this cable, a Freedom V2 battery can supply 14V DC power to run the Transcend Micro, enabling off-grid or portable use.

First-use steps involve inserting the USB-C connector into the battery’s DC output port and connecting the machine end to the CPAP device. After use, the cable should be disconnected from the battery.

Returns Policy

Always connect the USB-C side firmly into the Freedom V2 Battery’s DC Out port and the other side into the Transcend Micro power inlet before powering on.
Disconnect the cable from both the battery and CPAP machine when not in use to avoid unnecessary power drain.
Avoid bending or sharply twisting the cable, as this can damage the internal wiring and reduce its lifespan.
Store the cable in the same pouch as your Transcend Micro CPAP machine for easier travel organization.
Check the cable ends regularly for wear or loose connectors. Replace immediately if fraying or damage is visible.
Do not expose the cable to moisture. If it gets wet, dry completely before reconnecting to avoid short circuits.
Keep the cable away from heat sources or direct sunlight to prevent weakening of the insulation.
When traveling, pack the cable in a coiled loop instead of folding it tightly to maintain flexibility.
Use only with the Freedom V2 Battery. Other power banks or adapters may not deliver the correct 14V output and could damage your CPAP machine.
Clean the connectors occasionally with a dry cloth to remove dust or debris that might affect contact.
If you rely on your CPAP for long trips, carry a backup Freedom V2 Battery or spare cable to ensure uninterrupted therapy.
Check battery charge before bedtime, using the Transcend Micro with this cable will deplete the Freedom V2 faster if humidification or ramp features are active.

The Transcend Micro 14V Cable for Freedom V2 Battery is a DC power cable designed to let an existing Freedom V2 battery (or compatible battery) power a Transcend Micro travel CPAP machine. It connects the USB-C output of the battery (DC out) to the CPAP machine’s power inlet.

Using this cable, a Freedom V2 battery can supply 14V DC power to run the Transcend Micro, enabling off-grid or portable use.

First-use steps involve inserting the USB-C connector into the battery’s DC output port and connecting the machine end to the CPAP device. After use, the cable should be disconnected from the battery.

See Product Details

Freedom V2 Replacement Transcend Micro Machine DC Cable

$19.99

Product Features

Replacement Parts

Reviews

FAQs

Designed for Transcend Micro

This 14V cable connects the Freedom V2 CPAP Battery to the Transcend Micro Travel CPAP. It ensures proper voltage conversion, delivering consistent power that supports stable therapy without risking damage to the device’s electronics.

USB-C to Barrel Connector Interface

The cable features a USB-C plug for the Freedom V2 battery and a barrel connector for the Transcend Micro’s DC input. This direct-fit design matches both ports and eliminates the need for additional adapters.

Stable 14V Output Delivery

The dedicated cable allows the Freedom V2 battery to output a reliable 14V—matching the Transcend Micro’s power requirement. This prevents voltage fluctuations that could interrupt therapy or cause device alarms.

Support for Overnight Therapy

Once fully charged, the Freedom V2 battery can power the Transcend Micro for one or more nights, depending on your pressure settings. The cable’s direct connection helps minimize power loss and supports uninterrupted sleep.

Lightweight and Travel-Friendly

The cable is compact and easy to carry with your CPAP gear. It adds very little weight, preserving the portability of your Transcend Micro setup for both short trips and extended travel.

Safety Practices for Use

To protect the battery, the manufacturer advises unplugging the cable from both ends when therapy ends. This reduces idle power drain and helps prolong the life of your Freedom V2 battery.

Quick First-Time Setup

Setup is simple: connect the USB-C side to the Freedom V2 battery, then insert the barrel connector into the Transcend Micro. After use, disconnect both ends to prevent unintended battery discharge.

Reusable Accessory

This cable is designed for repeated use and long-term compatibility with the Freedom V2 and Transcend Micro. It offers a durable, cost-efficient alternative to buying a separate battery system.

FAQs

The 14V cable allows you to power a Transcend Micro CPAP machine directly from the Freedom V2 battery pack. It provides the correct voltage and secure connection needed for the device to run properly.

Yes. If you already own a Freedom V2 battery, this cable lets you use it with the Transcend Micro, eliminating the need to purchase a separate battery specifically for the machine.

Insert the USB-C end of the cable into the DC Out port on the Freedom V2 battery, then connect the other end into the power inlet of the Transcend Micro. After use, disconnect the cable from the battery to preserve its life.

It’s recommended to only use the cable once the battery is fully charged. Leaving the device connected while charging is not ideal and may reduce battery performance.

No. The cable is designed specifically to connect the Freedom V2 battery to the Transcend Micro CPAP. Other machines require their own dedicated cables.

The cable is generally referred to as the Transcend Micro 14V Cable for Freedom V2, designed only for this pairing.

Yes. The cable ensures the CPAP receives the correct voltage, so the machine operates at full capacity as long as the battery has adequate charge.

Runtime depends on your therapy settings, including prescribed pressure levels and whether additional accessories like humidification are used. The cable itself doesn’t limit operation — the Freedom V2 battery capacity determines total runtime.