Isometrical view of ResMed AirFit F30i headgear

AirTouch/AirFit F30i & X30i CPAP Masks Replacement Headgear

ResMed | SKU:

63372

AirTouch/AirFit F30i & X30i CPAP Masks Replacement Headgear

$36.00

In stock - Same Day Shipping for orders placed by 2PM EST.

Want to know the full specs?

View All Details

60-Night Guarantee

Free Shipping Over $50

Unlimited Support

Price Match Guarantee

This replacement headgear is made for the ResMed AirFit F30i, AirTouch F30i clear, AirTouch F30i comfort and AirFit X30i CPAP masks, so you can swap out a stretched or worn strap without replacing the whole mask.

It uses a plush, soft-touch fabric with multiple connection points to keep the fit stable, and magnetic clips that snap onto the frame for quick on/off.

Includes headgear only (mask frame/cushion sold separately). Because it contains magnets, it isn’t appropriate with certain implants or medical devices.

Airfit F30i Size Guide

Returns Policy

Check mask compatibility before ordering: This headgear is only meant for the ResMed AirFit F30i, AirTouch F30i, and AirFit X30i mask systems, so confirm the mask model name matches before you buy.
Confirm magnet safety first: This headgear uses magnetic clips, and ResMed warns magnets can interfere with certain implants or medical devices. Review ResMed’s magnet contraindications and warnings for the mask system before purchasing or using it.
Know what you are and are not getting: The box includes headgear only. The mask frame, cushion, elbow, and other components are sold separately, so make sure you are replacing the correct part.
Stick to the weekly cleaning method: ResMed’s care guidance is weekly handwashing in warm water (about 86°F / 30°C) with mild liquid detergent, followed by a thorough rinse to remove detergent.
Air-dry away from direct sunlight: After washing, ResMed instructs squeezing out excess water and letting the headgear air-dry out of direct sunlight, which helps avoid material stress from heat and UV exposure.
Rinse until detergent-free: ResMed specifically notes inspecting the headgear to ensure it is clean and detergent-free, and washing and rinsing again if needed, since leftover detergent can irritate skin and degrade the fabric over time.
Use the replacement guideline to plan ahead: ResMed’s recommended replacement guideline for headgear is every 6 months, so it helps to plan a replacement on that timeline if your fit starts changing.
Keep the clip ends in good condition: The headgear relies on the clip connection points for stability. During cleaning, handle the reinforced ends carefully and avoid twisting or pulling on the clip areas while wet.
Avoid using it if magnets are a restriction in your home: Because the clips are magnetic, this is not a “magnet-free” strap. If magnets are contraindicated for you, this headgear is not the right option for your setup.
Check sizing before you remove tags or open packaging: The manufacturer lists a specific size selection on purchase, so confirm you’re ordering the size you need to match your current setup and fit.

This replacement headgear is made for the ResMed AirFit F30i, AirTouch F30i clear, AirTouch F30i comfort and AirFit X30i CPAP masks, so you can swap out a stretched or worn strap without replacing the whole mask.

It uses a plush, soft-touch fabric with multiple connection points to keep the fit stable, and magnetic clips that snap onto the frame for quick on/off.

Includes headgear only (mask frame/cushion sold separately). Because it contains magnets, it isn’t appropriate with certain implants or medical devices.

See Product Details

AirTouch/AirFit F30i & X30i CPAP Masks Replacement Headgear

$36.00

Product Features

Replacement Parts

Reviews

FAQs

Secure, Adjustable Fit

Adjustable straps help fine-tune tension across different head sizes, so the mask sits stable without needing to overtighten. Multiple connection points attach to the mask frame to keep the fit consistent as you change positions during sleep.

Soft Feel, Less Skin Stress

Plush headgear is designed for softness and day-to-day comfort. The fabric is made to sit smoothly against the skin, helping reduce rubbing and pressure marks compared to stiffer strap materials.

Helps Support a Stable Seal

A consistent headgear fit helps keep the cushion seated where it should be, which can reduce leaks caused by shifting or uneven strap tension. Dialing in a balanced fit matters more than pulling the straps tight.

Made for F30i and X30i Mask Systems

Replacement headgear compatible with ResMed AirFit F30i, AirTouch F30i, and AirFit X30i masks. Works with the matching upper frame connection points on those mask systems, so the headgear aligns with the intended attachment layout.

Magnetic Clip Connection

Magnetic clips connect the lower headgear to the frame for quick on/off handling. Important: magnets may interfere with certain implants or medical devices, so users should follow ResMed’s magnet warnings and contraindications for the mask system.

Durable Woven Construction

Woven fabric is built for regular use and repeated fitting adjustments. Reinforced ends are designed to hold clip connections securely over time, helping the headgear stay dependable across nightly use and routine cleaning cycles.

Care, Cleaning, and Replacement Timing

Weekly handwash in warm water (about 86°F / 30°C) with mild liquid detergent, rinse well, squeeze out excess water, and air-dry away from direct sunlight. Typical replacement guideline for headgear is every 6 months, depending on wear and fit changes.

What’s Included

Box includes one replacement headgear only. Mask frame, cushion, elbow, and other mask parts are not included

The ResMed AirFit F30i & AirFit X30i CPAP Masks Replacement Headgear is praised for its comfortable fit and cushion, though some users report leaks. Customers appreciate the one-size-fits-all design and fast shipping, but a few mention tight straps.

Topics customers mention

Leaks 6% of reviews
The feedback is varied, with some users experiencing leaks, while others praise the fit and cushion.
Fit 23% of reviews
Many customers pointed out that the mask has a good fit and is comfortable, making it a popular choice.
Mask Comfort 40% of reviews
A substantial number of customers brought up that the mask is great, comfortable, and highly recommended.
Price 6% of reviews
Customers appreciated the great prices and fast shipping of the products. (7 out of 20 reviews)
Shipping Speed 6% of reviews
It was reported by customers that the shipping for this product is consistently fast and efficient, making it a great purchase.

Review highlights

"Initially the mask fits like a dream with no discomfort and minimal leaks."
Elio H.
"Great price easy to order, fast shipping."
William K.
"I ordered the small-wide cushion and it's a perfect fit."
Kathryn H.

Some reviews on this page were submitted by customers who received an incentive, such as a discount code, in exchange for their feedback.

FAQs

According to ResMed mask instructions for the F30i-style system, start by undoing the fastening tabs on the upper headgear straps and pull the headgear out of the frame. Keep the magnetic clips attached to the lower straps while you remove it.

ResMed’s disassembly guidance says to close the fastening tabs after detaching the headgear. That helps prevent the tabs from catching and damaging fabric sleeves while you handle or wash parts.

ResMed’s reassembly steps for the system place the logo facing outward and up, then insert the upper straps into the frame from the inside and fold the fastening tabs over to secure. After that, clip the lower straps back onto the frame.

ResMed’s fitting guidance for the mask system is to avoid overtightening because it can cause skin discomfort and make the fit worse. Aim for a secure, comfortable hold instead of cranking tension.

ResMed’s mask seal steps start with re-seating the cushion (no creases, no twisted headgear), then rebalancing strap tension while the device is running. Adjust the upper straps first, then the lower straps.

ResMed’s guidance for the F30i-style full face fit is: adjust the upper straps to address leaks around the nose area, and adjust the lower straps to address leaks around the cheek or chin area. Make small changes and recheck the seal with airflow running.

ResMed’s sizing guidance for the compatible mask system says: if the mask falls forward or sits too close to your eyes, try a larger frame size; if it falls back or sits too close to your ears, try a smaller frame size. Headgear can’t fix a frame size mismatch.

ResMed’s troubleshooting steps for the compatible mask system include checking the device “Mask Setting” and selecting Full Face. That helps the device’s leak compensation align with the mask type.

ResMed’s fitting flow has you unclip the magnets, pull the headgear and frame back on with the cushion positioned under the nose, then reattach the clips and tighten evenly. Doing it in that order helps the cushion sit flat before you fine-tune tension.

ResMed points users to the official “Mask Magnet Contraindications and Warnings” labeling document for complete details. Use that document as the source of truth for implant/device restrictions in your home.