Lightweight And Powerful Pack
The powerful Lithium-Ion Battery weighs just 2-pounds and will power your ResMed CPAP for 13-14 hours at 10CM. If you need more power, you use the optional Coupler Kit to connect two RPS II batteries in series. When coupled the secondary battery will automatically take over when the first battery runs out. RPS II Batteries recharge with the standard AC Power Supply from any compatible CPAP or BiLevel device so there is no extra recharging cord needed.
The RPS II is built to perfectly work with:
- All S9 CPAP & BiLevel Machines (S9 Escape, S9 Elite, S9 AutoSet, S9 VPAP S, S9 VPAP Auto, S9 VPAP ST, S9 VPAP Adapt SV, etc.)
- All AirSense 10 CPAP Machines (AirSense 10, AirSense 10 Elite, AirSense 10 AutoSet, AirSense 10 AutoSet for Her, etc.)
- All AirStart 10 CPAP Machines
- All AirCurve 10 BiLevel Machines (AirCurve 10 S, AirCurve 10 ST, AirCurve 10 VAuto, AirCurve 10 ASV, etc.)
Stylish Travel Bag
Designed to hold one or two batteries and includes a handy access panel so that batteries can be connected to a CPAP device or recharged while still in the bag. In addition a zippered pouch on the front of the bag can stores cables and accessories.
Included In Box:
RPS II Battery, Travel Bag, PSU Recharging Adapter, and DC Power Adapter. Select Additional Battery & Charging Options in Cart.
GTIN / UPC Code:
6 Months - Review manufacturer's documentation for full warranty details.
||Travel Case = 11.25 x 7.5 x 4.5 Inches
|AC (Wall) Power:
||Universal AC power 100-240V, 50-60Hz (Auto Sensing)
|Battery Type:||Lithium Ion (Li-ion) Battery|
|Battery Size:||9 x 5 x 1 Inches (Approx)|
|Battery Weight:||2 Lbs (Approx)|
|Battery Run Time:||Run times for most CPAP & BiLevel machines average between 13-14 hours at 10 CM. Run times will vary depending on the age of your machine, breath rate, leak rate, and machine settings. (Average)|
|Recharge Time:||4 Hours (Typical Per Battery)|
|Battery Life:||500 Cycles (Average)|
|Battery Notes:||RPS II Battery Packs recharge using the included PSU Adapter and the AC Power Supply with Cord from your existing CPAP or BiLevel Device. The Off/On Switch on the back of the RPS II Battery must be in the 'On' position when charging. Battery should not be left for more than 3 months without being fully recharged. For complete instructions review the documentation that came with your equipment.|
|Heated Humification & Heated Tubing:||Using a heated humidifier and/or heated tubing with your battery pack MAY significantly reduce run times. If you require a humidifier with your sleep therapy device consider using it in passover mode, with the heater turned off, to help extend battery life. For additional information on average run times review the Battery Compatibility & Run Times PDF available in the Downloads section of this page.|
Recently Viewed Products
30 Night Risk-Free Trial
Your satisfaction is our priority. That’s why we offer a 30 night risk-free trial on all Masks.